CO_2激光焊接TC4熔池红外光辐射信号与焊接参数的关系

利用CCD摄像机以及红外光辐射信号监测系统系统地研究了钛合金TC4激光焊接过程中红外光辐射信号的特征以及焊接线能量与熔池红外光辐射信号熔池面积的关系。研究表明,(1)对应整条焊缝,红外光辐射信号可明显分为3个阶段,分别对应焊接起始阶段、准稳态阶段及焊接收弧阶段(;2)当线能量增加(功率不变焊接速度降低)时,熔池面积变大,红外光辐射信号相对强度随之增强;(3)熔池面积与红外光辐射信号相对强度之间存在相同的变化规律,因此利用红外光辐射信号可以相当准确地监测焊接过程的熔池面积变化,进而监测焊接过程的稳定性。     

基于图像处理技术的铝合金腐蚀分形特征

通过基于二值图像处理技术对LY12CZ铝合金表面腐蚀图像进行特征提取,获取不同腐蚀时间下的蚀孔数目;基于统计分形模型的基础上,发现铝合金蚀孔分布具有统计意义上的分形特征;随着腐蚀时间的增加,分维数与失重率也随之增加,分维数随腐蚀时间的变化规律与失重率随腐蚀时间的变化规律基本一致,都符合幂函数的形式,故可采用分维数作为评...     

基于均值漂移算法的冷空炽热体红外目标跟踪

Mean Shift（均值漂移）算法对彩色序列图像目标跟踪是有效的,而对红外目标跟踪是不稳健的。本文对Mean Shift算法做适当改进,将其用于冷空炽热体红外目标跟踪。先对红外图像做伽马变换,把目标从背景中分离出来;用直方图非均匀量化改进传统Mean Shift算法量化方式,提高目标定位准确性。仿真结果表明,该方法对冷空炽热体红外目标跟踪是有效的和稳健的。     

Status of the Stratospheric Observatory for Infrared Astronomy (SOFIA)

The Stratospheric Observatory for Infrared Astronomy (SOFIA), a joint US/German project, is a 2.5-m infrared airborne telescope carried by a Boeing 747-SP that flies in the stratosphere at altitudes as high as 45,000 ft (13.72 km). This facility is capable of observing from 0.3 μm to 1.6 mm with an average transmission greater than 80% averaged over all wavelengths. SOFIA will be staged out of the NASA Dryden Flight Research Center aircraft operations facility at Palmdale, CA. The SOFIA Science Mission Operations (SMO) will be located at NASA Ames Research Center, Moffett Field, CA. First science flights began in 2010 and a full operations schedule of up to one hundred 8 to 10 hour-long flights per year will be reached by 2014. The observatory is expected to operate until the mid-2030s. SOFIA’s initial complement of seven focal plane instruments includes broadband imagers, moderate-resolution spectrographs that will resolve broad features due to dust and large molecules, and high-resolution spectrometers capable of studying the kinematics of atomic and molecular gas at sub-km/s resolution. We describe the SOFIA facility and outline the opportunities for observations by the general scientific community and for future instrumentation development. The operational characteristics of the SOFIA first-generation instruments are summarized. The status of the flight test program is discussed and we show First Light images obtained at wavelengths from 5.4 to 37 μm with the FORCAST imaging camera. Additional information about SOFIA is available at http://www.sofia.usra.edu and http://www.sofia.usra.edu/Science/docs/SofiaScienceVision051809-1.pdf.     

Infrared detection,review of existing and future devices

I present the current status of arrays of detectors operating in the 1–200 micron range, restricted to mature devices, and two recent concepts of infrared detection which could lead to future developments.     

涡扇发动机最小红外特征模式性能寻优控制研究

为抑制涡扇发动机排气系统的红外特征,提出一种基于红外预测模型的最小红外特征模式性能寻优控制。首先,建立一种排气系统正后向红外辐射强度简化预测模型,该预测方法考虑了排气系统内高温部件和尾喷流的红外辐射,以及尾喷流对高温部件红外辐射的吸收作用,具有可信的仿真精度;其次,基于涡扇发动机部件级实时仿真模型,增加了从外涵引气冷却中心锥和尾喷管扩张段内壁的冷却结构和红外预测模块;最后,基于该模型探索了最小红外特征模式的优化原理,并选用可行序列二次规划(FSQP)算法,通过控制高温壁面冷却气的流量,主燃烧室的燃油量以及尾喷管喉道面积,对两个亚声速巡航状态的工作点进行实时优化。仿真结果表明:在满足发动机推力恒定以及其他约束条件的前提下,发动机通过最小红外特征模式性能寻优控制,其排气系统后向红外辐射下降了30%以上,红外抑制效果显著。     

红外隐身涂层及对雷达吸波性能的影响

研究了红外雷达兼容隐身涂层红外发射率及雷达波隐身兼容性的影响因素,包括填料的类型、质量分数及涂层厚度。研究表明,以填充30wt%的HW-3型铝粉为填料,制备的涂层厚度为20μm时,涂层红外发射率达到0.25,能大幅降低材料表明红外辐射温度,且对微波隐身兼容性良好。     

空间特定目标表面的双波段红外辐射特性调控方法

红外诱饵等空间特定目标是对抗红外探测的主要手段之一。随着双色制导技术的发展,红外探测灵敏度不断提升,目标识别能力不断增强,这对空间特定目标表面的双波段红外辐射的逼真性提出了要求。通过改变空间特定目标表面发射率控制其红外辐射强度的大小,使用数值仿真的方法进行计算,从而提出了对空间特定目标表面红外辐射特性的调控方法。此外根据所确定的表面发射率、可见光吸收及红外发射比例以及内热源功率,选择合适的表面材料以及热功率施加方法,在保证空间特定目标表面机械性能的同时,使空间特定目标满足光照及阴影区的双波段红外辐射特性要求,并进行模型的制作以及热真空实验,证明了理论计算的准确性。     

Black hole accretion and X-ray spectra of QSOS

Changes in Eddington accretion ratios are thought to result in X-ray spectral index changes in Galactic binary black hole systems. Objects with higher Eddington ratios have softer X-ray spectra. Can we apply this result to much more massive black hole systems such as QSOs? If so, X-ray observations will give us valuable insight into the physics of QSOs. Among QSOs, X-ray spectral index is part of a large set of correlated optical and UV observational properties, especially optical Fe II and [O III] strengths in the Hβ region. To investigate whether this set of correlations is related to Eddington ratio, we use as probes, BALQSOs that have been suggested to be youthful super-accretors. We conducted infrared spectroscopy of the Hβ rest wavelength region for a sample of BALQSOs and compared line measurements with those for high and low redshift non-BAL QSOs. Hβ line widths and bolometric luminosity are used to calculate QSO black hole masses and Eddington ratios. Our results support the hypothesis that optical Fe II and [O III] line strengths are Eddington ratio indicators in QSO central engines. A possible explanation is that strong Fe II and weak [O III] indicate abundant cold gas that could fuel near Eddington accretion.     

用可变扩散湍流模型研究轴对称排气系统红外辐射特性

为研究可变扩散湍流模型在排气系统红外辐射特性计算中的适用性,计算了轴对称亚声速喷管在3 ～5μm波段的空腔-喷流组合红外辐射特性.喷管流场及温度场采用有限体积法求解N-S方程,湍流模型采用标准k-ε模型和可变扩散模型.红外特性计算采用有限体积法求解吸收-发射性介质条件下的三维辐射传输方程,并考虑大气衰减作用.计算结果与试验对比表明,与标准k-ε模型相比,可变扩散湍流模型能够有效改善亚声速热喷流的核心区长度,从而获得与试验结果一致的红外辐射强度,说明可变扩散湍流模型适用于精确模拟轴对称排气系统的红外辐射特性.